Lamps and lanterns, ceiling installation does not conform to the requirements

 small motor spares suppliers of motor parts 
Specifications
1.20 years fan&motor manufactruer 
2.We can open mould&punch&diecast&finish&winding 
3.competitive price,high quality 

1, phenomenon (l), lamp installation deviation, not on the center point. (2), the levelness of the rows of lamps and lanterns, straightness error is bigger. (3), chain hoist, chain is not parallel to the fluorescent lamp, under the diesel engine guide wire is not made up again. (4), ceiling fan hook with rebar processing, molding is poor; Bell doesn't absorb top, junction box appears. (5), large balcony lamp chassis plate, rust. (6) Jane lamp hole greatly, smallpox condole top, not neat. 2, root cause analysis (l), embedded lamp box when the position is wrong, wrong, install lamps and lanterns without to www.dongfeng-motor.com take remedial measures. (2), construction people curse is not strong sense of electric water pump responsibility, construction and acceptance of the existing norms, quality inspection evaluation standard are not familiar with. (3), buyer buy lamps and lanterns covet xuan, ignoring quality; 3 phase induction motor (4) was not set well, canister lamp hole size, do not have a unified nation, round hole diameter, etc. 3, preventive measures (l), before the installation of lamps and lanterns, should seriously find center, rectify the deviation. (2), according to French, rows of lamps and lanterns installation deviation should not be greater than 5 mm, therefore, need to stay in the construction of localization, the lamps and lanterns in vertical, horizontal, oblique and Lord with low levels are in a straight ac synchronous generator line. 


three phase induction electric motor Y series B35 1.5KW 2.2KW 37KW 75KW

Specifications
-One year warranty 
-Within 25 days delivery 

-Life: 5-7 years 
(3), fluorescent lamp chain hoist should be straight, not appear eight word, under the wire guide should with chain hoist plait fork. (4), embedded ceiling hooks, application of not single phase induction motor less than 8 Ф galvanized round steel reinforced fixed together with the plate and are not allowed to use rebar, processing and shaping hook should be consistent, and brush antirust paint. Bell can suck the top ceiling fans and will hook and the junction box cover. Rows of ceiling fan should be in a straight line, deviation of 5 mm or less. (5), the balcony iron plate thickness of 0.5 mm or more lamps ac synchronous generator and lanterns at the bottom of the box, and the paint surface is smooth, can play the role of rust; The glass can't be too thin, so as to avoid rupture during installation. (6), smallpox condole top tube light opening first shall be good coordinates, in addition to the required straight, neat and equally, the size of the hole should conform to the specifications of the diesel engine canister light, not too big, to acmotor2.blogspot.com ensure that the outer ring when the tube lamp installed firmly against condole top, not crack. (7), construction personnel, procurement staff to carefully implement the relevant state and local regulations.